leghemp97

Autowatch Ghost II Immobiliser Installation Ghost immobilisers are the latest technology in vehicle security. They are revolutionary in that they shield your vehicle from key cloning and hacking. The system has an exclusive disarm sequence which requires the correct PIN code to start your car. This is accomplished by pressing the buttons on your steering wheel or dashboard. TASSA Approved The new TASSA verified Ghost-II CAN immobiliser from Autowatch is a groundbreaking device created to fight recent crime trends, including key hacking and cloning. The smart system is connected directly to the CAN network of your vehicle, stopping it from being turned on or driven in the event that you don't have the proper code. The system is completely undetectable and doesn't utilize radio frequencies or a key fob, instead it lets you create a unique PIN sequence by using existing buttons in your vehicle, like those on the dashboard or steering wheel, which you can change at any time. The PIN can be as long as up to 20 presses long for maximum security. A secure emergency code is also provided. The system communicates with the vehicle's CAN data network in order to detect when the PIN has been entered. The system is then sent to the vehicle that disables the ignition, engine and shuts off crucial components such as the starter motor and fuel pump. The system has a 'valet mode' which allows you to disable it to prevent valets or staff from driving your vehicle without the right key. The Ghost device is distinct from traditional immobilisers that can be disarmed with professional diagnostic tools. It makes use of the onboard network to communicate with ECUs, and it cannot be altered. It's a sealed unit so it is impossible to listen into the circuits, making it virtually impossible for thieves to detect the distinctive clicking noise that traditional immobiliser relays produce. This technology is not susceptible to jamming tools utilized by high-tech thieves and is not detected by other diagnostic tool since it relies on CAN data networks. This makes it a great anti-theft solution for any modern vehicle. We'll visit your home or office to perform the installation once you have scheduled the installation. We will run through the entire demonstration with you, and then give you an owner's manual, an emergency cards, two Autowatch window sticker and an installation certification. Insurance Approved The Ghost is a security device installed aftermarket that protects against the types of thieves interested in stealing vehicles. It stops the engine from starting when a certain sequence of buttons is pressed. The sequence is only understood by you, therefore in the event that your vehicle is stolen thieves, they won't be in a position to start it, and may leave the vehicle in peace for fear of being caught. The ghost has a'silent' mode that turns off the vehicle when it is not being used. It can be disabled by pressing the button. The system is TASSA-approved, which means that certain insurance companies will accept it as an extra security measure for your vehicle. It can be utilized in conjunction with other Thatcham-approved security measures, like trackers, to help prevent your vehicle from being stolen. This gives you assurance. The system also communicates with the ECU of your vehicle through the CAN data loop, which is totally inaudible for diagnostic tools. This means a thief can't simply insert a new key or change the ECU to disable the Ghost. The system will only start your vehicle by entering the correct pin code. This unique pin code is only available to you and is able to be changed at any time. The Ghost is a discrete immobiliser that can be added to most vehicles without the need for wiring or installing aftermarket key fobs. It is linked directly to the vehicle's CAN data network and the personal PIN code of your preference is programmed into it by using the buttons on the steering wheel and dashboard. This code will prevent the vehicle from being started until the correct sequence has been selected first. If the code is guessable, there are secure emergency codes that can be reset via your mobile phone. There is an application that can be used on iOS and Android to reduce the requirement of entering pins every time, providing greater security. The shrewd Unlike an GPS tracker that only aids with finding your vehicle after it's stolen, an immobiliser system prevents the vehicle from being stolen in the first place. The Key Lab does this by stopping the engine from running until it is given the correct code through the key fob or a smartphone app downloaded to it. This is a great way to stop wheel-jacking and other thefts since the criminal is forced to leave the car alone or risk being arrested. The ghost immobiliser is a tiny weatherproof device that is tucked away inside the wiring harness in your vehicle. It connects to the CAN data network and is hidden away so that thieves cannot find it or disable it by simple wire cutting. The system also comes with a service mode which can be activated so that your garage can work on your vehicle, without needing to know the passcode in order for it to begin. Once you have the device attached to your vehicle you'll be able arm and disarm it from your smartphone via its dedicated application. You can even alter the PIN code at any time to ensure that only you have access to your vehicle. This is helpful if you're planning to sell your vehicle in the near future, as it will increase the resale value. Another benefit of the Ghost immobiliser is that it's discreet and won't leave any marks on the body of your car which makes it a great addition to any vehicle. It's simple to install, works quietly and won't interfere with other systems in your car. A subtle immobiliser can enhance the look and feel your vehicle. This is especially appealing to those who use their cars to transport valuable items, since it can keep thieves from pursuing them. A ghost immobiliser will work in conjunction with any other anti-theft device, such as a tracker to provide unrivalled security for your vehicle. Low Maintenance Ghost immobilisers work by connecting directly to the CAN data network. They are almost invisible, since they don't utilize LED indicators or other key fobs. It does not emit radio signals, and it is silent, meaning that thieves won't hear it. It can be hidden in a variety of places (even under the floor mats) and is an excellent option for those looking to protect their car without sacrificing aesthetics. This device stops you from starting your car unless you have a unique password. This is accomplished by a combination of buttons on your dashboard and the steering wheel in a specific sequence. This will stop thieves from cloning or hacking into your system, and stop them from starting the vehicle. The Ghost will detect this attempt to boost your signal and stop your vehicle from starting until the proper disarming code is entered. In contrast to other security systems which can be activated by entering the incorrect code and the Ghost will keep preventing your vehicle from starting until you put in the correct passcode. The Ghost will remain in “service mode' until you activate it by pressing the same combination of buttons you used to arm it (this can be done by visiting your dealer to perform maintenance or warranty work). This is a security measure to ensure that it's not removed by unauthorised people and it is then rearmed and brought back to service mode when needed. If you decide to switch vehicles in the course of ownership, it is possible to transfer the Ghost to the new vehicle if the new vehicle is compatible. The latest version of Ghost comes with QR finger prints that are connected to the International Security Register. This means that if you ever experience your Ghost stolen to replace parts, it will be traced to you and your car. This will stop thieves from stealing vehicles fitted with Ghost because they know that the vehicle is protected and they will be at risk of getting caught and arrested.